lawnax.blogg.se

Zyxel firmware recovery
Zyxel firmware recovery







zyxel firmware recovery

It was, however, less sophisticated than its predecessor, and in particular it lacked the self-propagating worm features that made NotPetya a general danger. WhisperGate was, like NotPetya a few years ago, a pseudo-ransomware attack that delivered a wiper behind defacements and spurious ransom demands. The Wall Street Journal sees last week's cyberattacks against Ukrainian targets as pointing to a broader risk of more general cyberwar. The operation is being called "WhisperGate." Microsoft has given the threat actor the temporary tracking identifier DEV-0586. It is, however, confident that the attack involved the use of a wiper, malware whose intent was the destruction of data, not their temporary denial (as in a conventional ransomware attack) or their theft.

zyxel firmware recovery

Microsoft said last Saturday that it hadn't been able to draw connections between Friday's cyberattacks against Ukraine and any of the threat actors it tracks. Increasing this number should work but has not been tested.Russia operates in the grey zone against Ukraine. Note that the number at the end indicates the size to write in hex. NSA310>nand write 0x2000000 ubi $filesize NAND erase.part: device 0 offset 0x140000, size 0x7ec0000 Use USB retry period from the environment: 15 second(s) One for the U-Boot and one for the OpenWrt firmware NSA310>usb reset There could be the need to use two different USB Sticks. Then we proceed to flashing OpenWrt itself (which we called nsa310.bin for less typing):

zyxel firmware recovery zyxel firmware recovery

NSA310>setenv bootcmd 'run setenv bootargs ubi part ubi ubi read 0x800000 kernel bootm 0x800000' Now we set the correct environment variables NAND write: device 0 offset 0x0, size 0x100000Īfter the device reboots into the OpenWrt u-boot we adjust the device's MAC address (adjust the values, see the sticker under the NAS case):Īddress in environment is AB:CD:EF:00:11:11 NAND erase: device 0 offset 0x0, size 0x100000 Disconnect power from nsa310, press power button for 5 seconds (to make sure everything is discharged and power is off) You may need to try a few times, and from true power off state.









Zyxel firmware recovery